Property investing

Victoria’s New Rental Gas and Electrical Safety Checks: A Landlord Checklist

Omar De Guise · Citadel Agency · 20 November 2026 · 9 min read
Laundry in a Victorian rental home with an electrical switchboard on the wall and a gas hot water system
In this article 12 sections
  1. Key takeaways
  2. What changed for Victorian rental safety checks on 13 October 2026?
  3. Who can do the gas and electrical safety checks?
  4. How often are the checks needed, and when is the first one due?
  5. What records do landlords need to keep?
  6. What happens if a landlord does not comply?
  7. What this means for investors
  8. What compliance records should you ask for before buying a Victorian rental?
  9. What other Victorian rental changes are coming in 2027?
  10. What to do now: a landlord checklist
  11. Frequently asked questions
  12. Sources

From 13 October 2026, every Victorian rental property must have an electrical safety check every two years, and a gas safety check every two years if it has gas appliances, fixtures or fittings. The change brings older leases into the same rules as newer ones, and rental providers must now also keep records showing the property met the rental minimum standards before it was advertised, offered or occupied.

Checked against Consumer Affairs Victoria pages on 20 November 2026.

Key takeaways

  • Since 13 October 2026, two yearly gas and electrical safety checks apply to all Victorian rental properties, for both new and existing leases.
  • Gas checks are needed only where the property has gas appliances, fixtures or fittings. Electrical checks apply to every rental.
  • Checks must be done by the right licence holder: a gasfitter endorsed in Type A gas appliance servicing, and a licensed or registered electrician.
  • Keep the latest check records until the next check, and give the renter a copy within 7 days of a written request.
  • You must also keep records showing the property met the minimum standards before it was advertised, offered or occupied, and give them to Consumer Affairs Victoria if asked.

What changed for Victorian rental safety checks on 13 October 2026?

Consumer Affairs Victoria (CAV) says that from 13 October 2026, the gas and electrical safety check requirement “applies to all rental properties”. Two yearly checks have been mandatory for agreements entered since March 2021. The October change extends them to every rental, including older leases.

In its 13 October 2026 announcement, CAV confirmed that all rental properties must have gas and electrical safety checks every 2 years, covering both new and existing rental agreements.

Two related changes started on the same day:

  • Gas check before draughtproofing. If the property has gas appliances, fixtures or fittings, a licensed or registered gasfitter must do a gas safety check within 6 months before any draughtproofing work begins.
  • Minimum standards records. Rental providers or their agents must keep records showing the property met the rental minimum standards before it was advertised, offered or occupied.

Who can do the gas and electrical safety checks?

CAV is specific about who can do each check.

Gas safety check. It must be done by a licensed or registered gasfitter who is endorsed in the specialised class of Type A Gas Appliances Servicing. The check covers the gas installation and appliances, including isolation valves, clearances, ventilation, appliance restraints, flues, leak testing and servicing of Type A appliances to Australian Standard AS 4575.

Electrical safety check. It must be done by a licensed or registered electrician. CAV notes electricians must be licensed with Energy Safe Victoria as Registered Electrical Contractors. The check covers all electrical installations, fixtures and fittings, assessed under section 4 of AS/NZS 3019.

The two checks can be booked separately. CAV says the pre draughtproofing gas check is separate from the two yearly check, though both can be combined in one visit if the gasfitter meets both sets of requirements.

How often are the checks needed, and when is the first one due?

Both checks are due every two years. If no check has been done in the two years before a renter moves in, CAV says the rental provider must arrange one as soon as possible.

For agreements that started before March 2021, CAV says that if the renter does not know when the last checks were done, they can ask the rental provider in writing for the date. If you hold an older lease and cannot find a check record from the last two years, book one now.

Before a new agreement starts, you must also tell the renter the date of the last gas and electrical safety checks and any outstanding recommendations.

What records do landlords need to keep?

There are two sets of records to manage.

Safety check records. The gasfitter and electrician should give you a record with their details, the check date, the results and any repairs or actions taken. For electrical checks, CAV says this includes an AS/NZS 3019 report. Keep the most recent gas and electrical records until the next record is created, and give the renter a copy within 7 days of a written request.

Minimum standards records. You or your agent must keep records showing the property met the minimum standards before it was advertised or offered for rent, and before the renter moved in. CAV can ask to see them.

CAV lists 15 minimum standards categories:

  • Bathrooms, toilets, kitchen and laundry
  • Electrical safety and lighting
  • Heating and ventilation
  • Locks and structural soundness
  • Mould and damp
  • Vermin proof bins
  • Windows, window coverings and window covering anchors

The electrical safety standard matters here. CAV says the electrical safety minimum standard commenced on 29 March 2023: rental properties must have modern switchboards, with circuit breakers and electrical safety switches (residual current devices) installed.

Simple records work well: dated photos, trade invoices, compliance certificates and a checklist signed off before each new listing.

What happens if a landlord does not comply?

CAV says non compliant rental providers, agents and rooming house operators may face warnings, fines, or court or other enforcement action. Its permanent Renting Taskforce monitors the rental market and enforces rental laws.

The wider consequences are also worth knowing:

  • Penalties for failing minimum standards. CAV says there are penalties for advertising, offering to let or providing a property that fails the minimum standards.
  • The renter can end the agreement. If a property does not meet the minimum standards after the agreement is signed but before move in, the renter can end the agreement immediately without fees.
  • Urgent repairs. A gas leak or a dangerous electrical fault is an urgent repair, and you must respond immediately. If you cannot be contacted or do not respond, the renter can arrange the repair up to $2,500, and you must repay them within 7 days of a written request.
  • VCAT. If repairs are not made, the renter can apply to VCAT.

What this means for investors

For investors holding older Victorian leases, the change closes a gap. A property let before March 2021 that has never had a formal check now has to meet the same two yearly cycle as a newer lease.

It also changes how you buy. When you assess a Victorian rental, ask the selling agent for the latest gas and electrical check records, any outstanding recommendations, and the minimum standards evidence. A property with a current check and clean records is simpler to take over. One without them means booking checks, and possibly repairs, soon after settlement. Build that into your assessment of any investment property and your building inspection.

What compliance records should you ask for before buying a Victorian rental?

This is Citadel’s compliance file request, set out in the order the answers usually arrive during a purchase. It turns the CAV rules above into questions for the selling agent.

  1. Before you inspect: does the property have any gas appliances, fixtures or fittings? That tells you whether the gas check applies at all.
  2. Before you make an offer: the dates of the last gas and electrical safety checks and any outstanding recommendations. A rental provider must already give these to a renter before a new agreement starts, so a well run property should have them to hand.
  3. Before you make an offer: copies of the gas safety check record and the AS/NZS 3019 electrical report.
  4. Before you sign: the minimum standards evidence for the current lease, such as dated photos, invoices or a signed checklist showing the property met the standards before it was advertised or let.
  5. Before you sign: whether any draughtproofing has been done or is planned and, if gas is present, the date of the gas check that came before it.
  6. Before settlement: confirmation from the property manager of who will hold these records from settlement day, and who will answer a renter’s written request within 7 days.

A note from our team: a missing record is not a reason on its own to walk away. It is a task and a cost to price in. Ask a licensed trade for a quote for both checks and add it to your figures in our cash flow investment calculator before you settle on a price. If you would like a second opinion on a Victorian rental before you commit, see our pre-purchase property review.

What other Victorian rental changes are coming in 2027?

CAV lists more changes on its new rental laws page (last updated 14 October 2026):

  • Phased in from 1 March 2027: minimum energy efficiency standards. Rental properties will need to meet new standards for heating, cooling, hot water, showerheads, ceiling insulation and draughtproofing. CAV says the changes begin in phases and have different triggers. The pre draughtproofing gas check above is where the two sets of rules meet.
  • 1 June 2027: bonds paid directly to the RTBA. It will be an offence for a rental provider to refuse to enter a rental agreement with a renter who chooses to pay their bond directly to the Residential Tenancies Bond Authority. Renters have been able to make that choice since 9 September 2026.
  • 1 June 2027: keys and fobs. Rental providers and agents must not unreasonably refuse a renter’s request for an additional key or fob, and may charge a reasonable fee for it.
  • 1 June 2027: lease break fees. A maximum limit on the compensation payable when a renter ends a fixed term agreement early.

Check the CAV page before you act, because dates and details can change. Investors buying in Melbourne can read more on our Melbourne buyers agent page.

What to do now: a landlord checklist

General information only. Talk to your property manager and licensed trades about your own property.

  1. Find your last check dates. Look for gas and electrical records from the last two years for every Victorian rental you own.
  2. Book any overdue checks. Use a gasfitter endorsed in Type A gas appliance servicing and a licensed or registered electrician.
  3. Confirm whether the property has gas. If it has any gas appliances, fixtures or fittings, the gas check applies.
  4. Plan draughtproofing carefully. If gas is present, get the gas check done within 6 months before the work starts.
  5. Act on recommendations. Arrange repairs the trades identify, and keep the invoices and certificates.
  6. Build a minimum standards file. Keep dated evidence for all 15 categories before each new listing or lease.
  7. Brief your property manager. Agree who holds the records and who will answer a renter’s written request within 7 days.

Citadel Agency is a licensed buyers agency that helps investors buy in Victoria and interstate, and we ask for safety and compliance records as part of our due diligence. Learn more on our Victoria buyers agent page.

Frequently asked questions

When did the new rental safety checks start in Victoria?

From 13 October 2026, two yearly gas and electrical safety checks apply to all Victorian rental properties, including leases that started before March 2021.

Do I need a gas safety check if my rental has no gas?

No. Consumer Affairs Victoria says gas safety checks are only needed in properties that have gas appliances, fixtures or fittings. The electrical safety check applies to every rental.

Who can do a rental gas safety check?

A licensed or registered gasfitter endorsed in the specialised class of Type A Gas Appliances Servicing.

How long do I keep safety check records?

Keep the most recent gas and electrical check records until the next record is created. If the renter asks in writing, you must give them a copy within 7 days.

What are minimum standards records?

Records that show the property met the rental minimum standards before it was advertised, offered or occupied. Rental providers and agents must give them to Consumer Affairs Victoria if asked.

What happens if I do not do the checks?

Consumer Affairs Victoria says non compliant rental providers and agents may face warnings, fines, or court or other enforcement action.

What Victorian rental changes start in 2027?

Consumer Affairs Victoria lists minimum energy efficiency standards phased in from 1 March 2027, and from 1 June 2027 rules on bonds paid directly to the RTBA, extra keys and fobs, and a cap on lease break fees.

Sources

Want help checking the compliance side of your next purchase? Book a free strategy call with our team.

General information only. It does not take into account your objectives, financial situation or needs. Speak to a qualified professional before acting.

Written by Omar De Guise, Citadel Agency
Citadel Agency is a licensed, data-led buyers agency for property investors (licence 092247L), with $200M+ in deals transacted and 5.0 from 150+ Google reviews. About us

General information only. It does not take your objectives, financial situation or needs into account and is not financial, tax, credit or legal advice.

Keep reading

Related articles

Want a second opinion on your next purchase?A licensed buyers agent will look at your budget, borrowing and goals.
Book a free strategy call